Page 1 of 1
Error in mutex_unlock() - Operation not permitted
Posted: Fri Oct 03, 2008 10:18 am
by dclotto
Hy all, i need help...
I've searched but found no solution to my case:
"ds_ipcflush () - Error in mutex_unlock () - Operation not permitted."
Reseting the job, I have the following message:
"From previous run
DataStage Job 2422 Phantom 3718
Abnormal termination of DataStage.
Fault type is 11. Layer type is BASIC run machine.
Fault occurred in BASIC program at DSD.BCIGetByKey address "
I have ...?
Thanks!
The complete log:
Posted: Fri Oct 03, 2008 10:23 am
by dclotto
Item #: 5
Event ID: 4
Timestamp: 2008-10-03 12:51:11
Type: Warning
User Name: dsadm
Message: Abnormal termination of stage REVDWNAtualizaDepto..Modelo detected
Item #: 6
Event ID: 5
Timestamp: 2008-10-03 12:52:10
Type: Info
User Name: dsadm
Message: REVDWNAtualizaDepto..Modelo.LTR_MODELO: Run stopped after 47294 rows
Item #: 7
Event ID: 6
Timestamp: 2008-10-03 12:52:10
Type: Fatal
User Name: dsadm
Message: REVDWNAtualizaDepto..Encontra_DE_PARA: |19|
Item #: 8
Event ID: 7
Timestamp: 2008-10-03 12:52:10
Type: Warning
User Name: dsadm
Message: Attempting to Cleanup after ABORT raised in stage REVDWNAtualizaDepto..Encontra_DE_PARA
Item #: 9
Event ID: 8
Timestamp: 2008-10-03 12:52:10
Type: Warning
User Name: dsadm
Message: REVDWNAtualizaDepto..Modelo.LTR_MODELO: ds_ipcflush() - Error in mutex_unlock() - Operation not permitted.
Item #: 10
Event ID: 9
Timestamp: 2008-10-03 12:52:10
Type: Warning
User Name: dsadm
Message: REVDWNAtualizaDepto..Encontra_DE_PARA.LTR_MODELO: DSD.INTClose Error 11 in GCI close.
Item #: 11
Event ID: 10
Timestamp: 2008-10-03 12:52:10
Type: Info
User Name: dsadm
Message: REVDWNAtualizaDepto..Encontra_DE_PARA: Transaction rolled back due to job abort.
Item #: 12
Event ID: 11
Timestamp: 2008-10-03 12:52:14
Type: Control
User Name: dsadm
Message: Job REVDWNAtualizaDepto aborted.
Thanks!
Posted: Fri Oct 03, 2008 10:49 am
by chulett
Job design?
Posted: Fri Oct 03, 2008 11:11 am
by dclotto
Posted: Sat Oct 04, 2008 5:37 am
by ArndW
What are your settings for Job Properties -> Performance for the row buffering settings? Also, the ipc_ problems could be symptomatic of the actual stage aborting and the 2nd process required for ipc no longer being there. You could try going to your project directory, changing into the &PH& directory and removing all the files there, then running your job and looking at the newly created files (they are text files which you can "cat" or "more") for additional error messages.
Posted: Mon Oct 06, 2008 7:20 am
by dclotto
The following settings:
http://www.flickr.com/photos/dclotto/2918749238/
But I tried to leave as "Use project defaults" and not solved ...
What else would be ...?
Thanks!
Posted: Mon Oct 06, 2008 7:23 am
by dclotto
The following settings:
http://www.flickr.com/photos/dclotto/2918749238/
But I tried to leave as "Use project defaults" and not solved ...
What else would be ...?
Thanks!