Post questions here relative to DataStage Enterprise/PX Edition for such areas as Parallel job design, Parallel datasets, BuildOps, Wrappers, etc.
Moderators: chulett , rschirm , roy
dhletl
Participant
Posts: 22 Joined: Mon Aug 23, 2004 1:13 am
Post
by dhletl » Mon Oct 04, 2004 3:07 am
Hi,
Am facing problems with deployment of any job binary produced on one box - on any other box.
The process I follow is - create any PX job on box1 and compile the same to create its binary. Ensure that the job runs fine on this box(where it was created).
Export that job from box1 and import it into another PX environment on box2. On running the job binary on the 2nd box - it fails.
Any pointers to this are most welcome.
Thanks,
Nitin
Eric
Participant
Posts: 254 Joined: Mon Sep 29, 2003 4:35 am
Post
by Eric » Mon Oct 04, 2004 4:46 am
Are you running the same OS and OS version on both boxes?
Does your job design contain Custom Stages?
Does your Job contain the PX Transformer Stage?
dhletl
Participant
Posts: 22 Joined: Mon Aug 23, 2004 1:13 am
Post
by dhletl » Mon Oct 04, 2004 4:54 am
>>Are you running the same OS and OS version on both boxes?
Yes (both hv the same environment)
>>Does your job design contain Custom Stages?
No ..
>>Does your Job contain the PX Transformer Stage?
Tried job with and without Xformer - same result!
Eric
Participant
Posts: 254 Joined: Mon Sep 29, 2003 4:35 am
Post
by Eric » Tue Oct 05, 2004 10:08 am
I guess you would have to give more detail about the failure
dhletl
Participant
Posts: 22 Joined: Mon Aug 23, 2004 1:13 am
Post
by dhletl » Wed Oct 06, 2004 8:12 pm
Ok. Just to be sure - can u suggest me what's the right method of deploying a job binary/executable prepared at one box on another one?