Anyone knows if it is possible to connect to server version 6 with the new
client version 7?
Thanks!
Wim van Dommelen.
****************************DISCLAIMER***********************************
Deze e-mail is uitsluitend bestemd voor de geadresseerde(n). Verstrekking aan en gebruik door anderen is niet toegestaan. Fortis sluit iedere aansprakelijkheid uit die voortvloeit uit electronische verzending.
This e-mail is intended exclusively for the addressee(s), and may not be
passed on to, or made available for use by any person other than the
addressee(s). Fortis rules out any and every liability resulting from
any electronic transmission.
*******************************************************************************
Can client v. 7 connect to server v. 6?
Can client v. 7 connect to server v. 6?
<b>PLEASE READ</b>
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
Can client v. 7 connect to server v. 6?
The work around we use when upgrading DataStage is Windows Terminal
Services.
Have one version (say, the new one) on your own PC and the other version
(say, the old one) on a Terminal Server. I'd recommend using the newer
remote desktop client (comes with XP, but can be downloaded for other
versions of windows).
As an added bonus, it works great over a dial up connection or wide area
network. We have a 2Mbit link between our desktops and our DataStage
servers. Director runs better on a terminal server on the same LAN as the
DataStage server that it does on our own PCs.
-----Original Message-----
From: Bruce William [mailto:bwilliam_ds@yahoo.com]
Sent: Tuesday, 25 November 2003 8:10 PM
To: datastage-users@oliver.com
Subject: RE: Can client v. 7 connect to server v. 6?
Ben,
Is there a tool that supports clients - v4.2 and v6
we are on migration from v4.2 to v6.
I know its not possible to have both clients in same
machine. possible work arounds???
regards,
william
--- "REVERTE Benoit (Cetelem)"
wrote:
> Wim,
>
> it is not possible.
>
> there is a tool called 'ClientSwitcher' on the v7
> install disc (unsupported
> directory).
> Using the tool and having installed both v6 and v7
> client, you should be
> able to work alternatively on v6 or v7.
>
> Regards,
> Ben
>
> -----Message d'origine-----
> De : Dommelen van W. (Wim)
> [mailto:Wim.van.Dommelen@NL.Fortis.com]
> Envoyi : mardi 25 novembre 2003 08:37
> @ : 'datastage-users@oliver.com'
> Objet : Can client v. 7 connect to server v. 6?
>
>
> Anyone knows if it is possible to connect to server
> version 6 with the new
> client version 7?
>
> Thanks!
>
> Wim van Dommelen.
>
>
>
****************************DISCLAIMER***********************************
>
> Deze e-mail is uitsluitend bestemd voor de
> geadresseerde(n). Verstrekking
> aan en gebruik door anderen is niet toegestaan.
> Fortis sluit iedere
> aansprakelijkheid uit die voortvloeit uit
> electronische verzending.
>
> This e-mail is intended exclusively for the
> addressee(s), and may not be
> passed on to, or made available for use by any
> person other than the
> addressee(s). Fortis rules out any and every
> liability resulting from
> any electronic transmission.
>
****************************************************************************
> ***
>
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
Services.
Have one version (say, the new one) on your own PC and the other version
(say, the old one) on a Terminal Server. I'd recommend using the newer
remote desktop client (comes with XP, but can be downloaded for other
versions of windows).
As an added bonus, it works great over a dial up connection or wide area
network. We have a 2Mbit link between our desktops and our DataStage
servers. Director runs better on a terminal server on the same LAN as the
DataStage server that it does on our own PCs.
-----Original Message-----
From: Bruce William [mailto:bwilliam_ds@yahoo.com]
Sent: Tuesday, 25 November 2003 8:10 PM
To: datastage-users@oliver.com
Subject: RE: Can client v. 7 connect to server v. 6?
Ben,
Is there a tool that supports clients - v4.2 and v6
we are on migration from v4.2 to v6.
I know its not possible to have both clients in same
machine. possible work arounds???
regards,
william
--- "REVERTE Benoit (Cetelem)"
wrote:
> Wim,
>
> it is not possible.
>
> there is a tool called 'ClientSwitcher' on the v7
> install disc (unsupported
> directory).
> Using the tool and having installed both v6 and v7
> client, you should be
> able to work alternatively on v6 or v7.
>
> Regards,
> Ben
>
> -----Message d'origine-----
> De : Dommelen van W. (Wim)
> [mailto:Wim.van.Dommelen@NL.Fortis.com]
> Envoyi : mardi 25 novembre 2003 08:37
> @ : 'datastage-users@oliver.com'
> Objet : Can client v. 7 connect to server v. 6?
>
>
> Anyone knows if it is possible to connect to server
> version 6 with the new
> client version 7?
>
> Thanks!
>
> Wim van Dommelen.
>
>
>
****************************DISCLAIMER***********************************
>
> Deze e-mail is uitsluitend bestemd voor de
> geadresseerde(n). Verstrekking
> aan en gebruik door anderen is niet toegestaan.
> Fortis sluit iedere
> aansprakelijkheid uit die voortvloeit uit
> electronische verzending.
>
> This e-mail is intended exclusively for the
> addressee(s), and may not be
> passed on to, or made available for use by any
> person other than the
> addressee(s). Fortis rules out any and every
> liability resulting from
> any electronic transmission.
>
****************************************************************************
> ***
>
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
<b>PLEASE READ</b>
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
Can client v. 7 connect to server v. 6?
I should have also mentioned ...
You can get shareware products (I don't know any by name, but I've seen them
in action) that will run a virtual computer (complete with it's own separate
OS, virtual disk etc) on your computer at the same time you as are running
windows. You can switch between the 2 on the fly. Your real computer and
the virtual computer can talk to each other via the network as if they were
2 separate computers.
If you used this approach, you could run one version of DataStage client on
your "real" computer and the other version on the "virtual" computer ... at
the same time.
-----Original Message-----
From: Bruce William [mailto:bwilliam_ds@yahoo.com]
Sent: Tuesday, 25 November 2003 8:10 PM
To: datastage-users@oliver.com
Subject: RE: Can client v. 7 connect to server v. 6?
Ben,
Is there a tool that supports clients - v4.2 and v6
we are on migration from v4.2 to v6.
I know its not possible to have both clients in same
machine. possible work arounds???
regards,
william
--- "REVERTE Benoit (Cetelem)"
wrote:
> Wim,
>
> it is not possible.
>
> there is a tool called 'ClientSwitcher' on the v7
> install disc (unsupported
> directory).
> Using the tool and having installed both v6 and v7
> client, you should be
> able to work alternatively on v6 or v7.
>
> Regards,
> Ben
>
> -----Message d'origine-----
> De : Dommelen van W. (Wim)
> [mailto:Wim.van.Dommelen@NL.Fortis.com]
> Envoyi : mardi 25 novembre 2003 08:37
> @ : 'datastage-users@oliver.com'
> Objet : Can client v. 7 connect to server v. 6?
>
>
> Anyone knows if it is possible to connect to server
> version 6 with the new
> client version 7?
>
> Thanks!
>
> Wim van Dommelen.
>
>
>
****************************DISCLAIMER***********************************
>
> Deze e-mail is uitsluitend bestemd voor de
> geadresseerde(n). Verstrekking
> aan en gebruik door anderen is niet toegestaan.
> Fortis sluit iedere
> aansprakelijkheid uit die voortvloeit uit
> electronische verzending.
>
> This e-mail is intended exclusively for the
> addressee(s), and may not be
> passed on to, or made available for use by any
> person other than the
> addressee(s). Fortis rules out any and every
> liability resulting from
> any electronic transmission.
>
****************************************************************************
> ***
>
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
You can get shareware products (I don't know any by name, but I've seen them
in action) that will run a virtual computer (complete with it's own separate
OS, virtual disk etc) on your computer at the same time you as are running
windows. You can switch between the 2 on the fly. Your real computer and
the virtual computer can talk to each other via the network as if they were
2 separate computers.
If you used this approach, you could run one version of DataStage client on
your "real" computer and the other version on the "virtual" computer ... at
the same time.
-----Original Message-----
From: Bruce William [mailto:bwilliam_ds@yahoo.com]
Sent: Tuesday, 25 November 2003 8:10 PM
To: datastage-users@oliver.com
Subject: RE: Can client v. 7 connect to server v. 6?
Ben,
Is there a tool that supports clients - v4.2 and v6
we are on migration from v4.2 to v6.
I know its not possible to have both clients in same
machine. possible work arounds???
regards,
william
--- "REVERTE Benoit (Cetelem)"
wrote:
> Wim,
>
> it is not possible.
>
> there is a tool called 'ClientSwitcher' on the v7
> install disc (unsupported
> directory).
> Using the tool and having installed both v6 and v7
> client, you should be
> able to work alternatively on v6 or v7.
>
> Regards,
> Ben
>
> -----Message d'origine-----
> De : Dommelen van W. (Wim)
> [mailto:Wim.van.Dommelen@NL.Fortis.com]
> Envoyi : mardi 25 novembre 2003 08:37
> @ : 'datastage-users@oliver.com'
> Objet : Can client v. 7 connect to server v. 6?
>
>
> Anyone knows if it is possible to connect to server
> version 6 with the new
> client version 7?
>
> Thanks!
>
> Wim van Dommelen.
>
>
>
****************************DISCLAIMER***********************************
>
> Deze e-mail is uitsluitend bestemd voor de
> geadresseerde(n). Verstrekking
> aan en gebruik door anderen is niet toegestaan.
> Fortis sluit iedere
> aansprakelijkheid uit die voortvloeit uit
> electronische verzending.
>
> This e-mail is intended exclusively for the
> addressee(s), and may not be
> passed on to, or made available for use by any
> person other than the
> addressee(s). Fortis rules out any and every
> liability resulting from
> any electronic transmission.
>
****************************************************************************
> ***
>
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
<b>PLEASE READ</b>
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
Can client v. 7 connect to server v. 6?
ya, there is a tool vmware which enable you to have a
virtual computer and switches b/n the OS on a click.
As there are complexities involved in having two
clients on same machine we decided to divide the
development group and work resp.
thanks,
william
--- David Barham wrote:
> I should have also mentioned ...
>
> You can get shareware products (I don't know any by
> name, but I've seen them
> in action) that will run a virtual computer
> (complete with it's own separate
> OS, virtual disk etc) on your computer at the same
> time you as are running
> windows. You can switch between the 2 on the fly.
> Your real computer and
> the virtual computer can talk to each other via the
> network as if they were
> 2 separate computers.
>
> If you used this approach, you could run one version
> of DataStage client on
> your "real" computer and the other version on the
> "virtual" computer ... at
> the same time.
>
>
> -----Original Message-----
> From: Bruce William [mailto:bwilliam_ds@yahoo.com]
> Sent: Tuesday, 25 November 2003 8:10 PM
> To: datastage-users@oliver.com
> Subject: RE: Can client v. 7 connect to server v. 6?
>
> Ben,
> Is there a tool that supports clients - v4.2 and
> v6
> we are on migration from v4.2 to v6.
> I know its not possible to have both clients in same
> machine. possible work arounds???
>
>
> regards,
> william
>
>
> --- "REVERTE Benoit (Cetelem)"
> wrote:
> > Wim,
> >
> > it is not possible.
> >
> > there is a tool called 'ClientSwitcher' on the v7
> > install disc (unsupported
> > directory).
> > Using the tool and having installed both v6 and v7
> > client, you should be
> > able to work alternatively on v6 or v7.
> >
> > Regards,
> > Ben
> >
> > -----Message d'origine-----
> > De : Dommelen van W. (Wim)
> > [mailto:Wim.van.Dommelen@NL.Fortis.com]
> > Envoyi : mardi 25 novembre 2003 08:37
> > @ : 'datastage-users@oliver.com'
> > Objet : Can client v. 7 connect to server v. 6?
> >
> >
> > Anyone knows if it is possible to connect to
> server
> > version 6 with the new
> > client version 7?
> >
> > Thanks!
> >
> > Wim van Dommelen.
> >
> >
> >
>
****************************DISCLAIMER***********************************
> >
> > Deze e-mail is uitsluitend bestemd voor de
> > geadresseerde(n). Verstrekking
> > aan en gebruik door anderen is niet toegestaan.
> > Fortis sluit iedere
> > aansprakelijkheid uit die voortvloeit uit
> > electronische verzending.
> >
> > This e-mail is intended exclusively for the
> > addressee(s), and may not be
> > passed on to, or made available for use by any
> > person other than the
> > addressee(s). Fortis rules out any and every
> > liability resulting from
> > any electronic transmission.
> >
>
****************************************************************************
> > ***
> >
>
>
> __________________________________
> Do you Yahoo!?
> Free Pop-Up Blocker - Get it now
> http://companion.yahoo.com/
>
>
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
virtual computer and switches b/n the OS on a click.
As there are complexities involved in having two
clients on same machine we decided to divide the
development group and work resp.
thanks,
william
--- David Barham wrote:
> I should have also mentioned ...
>
> You can get shareware products (I don't know any by
> name, but I've seen them
> in action) that will run a virtual computer
> (complete with it's own separate
> OS, virtual disk etc) on your computer at the same
> time you as are running
> windows. You can switch between the 2 on the fly.
> Your real computer and
> the virtual computer can talk to each other via the
> network as if they were
> 2 separate computers.
>
> If you used this approach, you could run one version
> of DataStage client on
> your "real" computer and the other version on the
> "virtual" computer ... at
> the same time.
>
>
> -----Original Message-----
> From: Bruce William [mailto:bwilliam_ds@yahoo.com]
> Sent: Tuesday, 25 November 2003 8:10 PM
> To: datastage-users@oliver.com
> Subject: RE: Can client v. 7 connect to server v. 6?
>
> Ben,
> Is there a tool that supports clients - v4.2 and
> v6
> we are on migration from v4.2 to v6.
> I know its not possible to have both clients in same
> machine. possible work arounds???
>
>
> regards,
> william
>
>
> --- "REVERTE Benoit (Cetelem)"
> wrote:
> > Wim,
> >
> > it is not possible.
> >
> > there is a tool called 'ClientSwitcher' on the v7
> > install disc (unsupported
> > directory).
> > Using the tool and having installed both v6 and v7
> > client, you should be
> > able to work alternatively on v6 or v7.
> >
> > Regards,
> > Ben
> >
> > -----Message d'origine-----
> > De : Dommelen van W. (Wim)
> > [mailto:Wim.van.Dommelen@NL.Fortis.com]
> > Envoyi : mardi 25 novembre 2003 08:37
> > @ : 'datastage-users@oliver.com'
> > Objet : Can client v. 7 connect to server v. 6?
> >
> >
> > Anyone knows if it is possible to connect to
> server
> > version 6 with the new
> > client version 7?
> >
> > Thanks!
> >
> > Wim van Dommelen.
> >
> >
> >
>
****************************DISCLAIMER***********************************
> >
> > Deze e-mail is uitsluitend bestemd voor de
> > geadresseerde(n). Verstrekking
> > aan en gebruik door anderen is niet toegestaan.
> > Fortis sluit iedere
> > aansprakelijkheid uit die voortvloeit uit
> > electronische verzending.
> >
> > This e-mail is intended exclusively for the
> > addressee(s), and may not be
> > passed on to, or made available for use by any
> > person other than the
> > addressee(s). Fortis rules out any and every
> > liability resulting from
> > any electronic transmission.
> >
>
****************************************************************************
> > ***
> >
>
>
> __________________________________
> Do you Yahoo!?
> Free Pop-Up Blocker - Get it now
> http://companion.yahoo.com/
>
>
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
<b>PLEASE READ</b>
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.