Hi Forumers:
I have a big problem, and I'm not sure from where it is comming. I got the
following error message:
"CHKSAP.EL221.JobControl (fatal error from DSAttachJob): Job control fatal
error (-12)
(DSGetJobInfo) ChequeaPedidosActivos.EL221: RT_STATUS Record for wave 653
not found.
(DSOpenJob) Cannot open job ChequeaPedidosActivos.EL221 - not a runnable
job"
Let me clarify: the CHKSAP job runs the ChequeaPedidosActivos job, using
the same invocation id. When it tries to start the job, the message apears,
and the CHKSAP.EL221 job aborts.
When I try to compile the job ChequeaPedidosActivos, another error message
appears saying that job is being monitored. When I try to erase it, the
same message appears.
Can anybody tell me what is happening, and how can I solve this situation ?
Thanks in advance.
Guillermo P. Barsky - gbarsky@osde.com.ar
Gerencia de Sistemas - Desarrollo
OSDE Binario - Filial Metropolitana
Alem 1067, Piso 16
(5411)4510-4330
http://www.osde.com.ar
URGENT: problem with wave 653
URGENT: problem with wave 653
<b>PLEASE READ</b>
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
URGENT: problem with wave 653
Check if you have the Monitor Window in the Director opened for this
job. If it is opened, close the monitor window and then compile the job.
----- Original Message -----
From: gbarsky@osde.com.ar
Date: Monday, November 10, 2003 9:50 pm
Subject: URGENT: problem with wave 653
>
>
>
>
> Hi Forumers:
>
> I have a big problem, and I'm not sure from where it is comming. I
> got the
> following error message:
>
> "CHKSAP.EL221.JobControl (fatal error from DSAttachJob): Job
> control fatal
> error (-12)
> (DSGetJobInfo) ChequeaPedidosActivos.EL221: RT_STATUS Record for
> wave 653
> not found.
> (DSOpenJob) Cannot open job ChequeaPedidosActivos.EL221 - not a
> runnablejob"
>
> Let me clarify: the CHKSAP job runs the ChequeaPedidosActivos job,
> usingthe same invocation id. When it tries to start the job, the
> message apears,
> and the CHKSAP.EL221 job aborts.
>
> When I try to compile the job ChequeaPedidosActivos, another error
> messageappears saying that job is being monitored. When I try to
> erase it, the
> same message appears.
>
> Can anybody tell me what is happening, and how can I solve this
> situation ?
>
> Thanks in advance.
>
>
> Guillermo P. Barsky - gbarsky@osde.com.ar
> Gerencia de Sistemas - Desarrollo
>
> OSDE Binario - Filial Metropolitana
> Alem 1067, Piso 16
> (5411)4510-4330
> http://www.osde.com.ar
>
>
>
job. If it is opened, close the monitor window and then compile the job.
----- Original Message -----
From: gbarsky@osde.com.ar
Date: Monday, November 10, 2003 9:50 pm
Subject: URGENT: problem with wave 653
>
>
>
>
> Hi Forumers:
>
> I have a big problem, and I'm not sure from where it is comming. I
> got the
> following error message:
>
> "CHKSAP.EL221.JobControl (fatal error from DSAttachJob): Job
> control fatal
> error (-12)
> (DSGetJobInfo) ChequeaPedidosActivos.EL221: RT_STATUS Record for
> wave 653
> not found.
> (DSOpenJob) Cannot open job ChequeaPedidosActivos.EL221 - not a
> runnablejob"
>
> Let me clarify: the CHKSAP job runs the ChequeaPedidosActivos job,
> usingthe same invocation id. When it tries to start the job, the
> message apears,
> and the CHKSAP.EL221 job aborts.
>
> When I try to compile the job ChequeaPedidosActivos, another error
> messageappears saying that job is being monitored. When I try to
> erase it, the
> same message appears.
>
> Can anybody tell me what is happening, and how can I solve this
> situation ?
>
> Thanks in advance.
>
>
> Guillermo P. Barsky - gbarsky@osde.com.ar
> Gerencia de Sistemas - Desarrollo
>
> OSDE Binario - Filial Metropolitana
> Alem 1067, Piso 16
> (5411)4510-4330
> http://www.osde.com.ar
>
>
>
<b>PLEASE READ</b>
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
URGENT: problem with wave 653
William:
Thaks for your response, but there is not an active monitor.
Guillermo P. Barsky - gbarsky@osde.com.ar
Gerencia de Sistemas - Desarrollo
OSDE Binario - Filial Metropolitana
Alem 1067, Piso 16
(5411)4510-4330
http://www.osde.com.ar
"William Tan"
com.my> cc:
Asunto: Re: URGENT: problem with wave 653
10/11/2003 02:36
p.m.
Por favor, responda
a datastage-users
Check if you have the Monitor Window in the Director opened for this
job. If it is opened, close the monitor window and then compile the job.
----- Original Message -----
From: gbarsky@osde.com.ar
Date: Monday, November 10, 2003 9:50 pm
Subject: URGENT: problem with wave 653
>
>
>
>
> Hi Forumers:
>
> I have a big problem, and I'm not sure from where it is comming. I
> got the
> following error message:
>
> "CHKSAP.EL221.JobControl (fatal error from DSAttachJob): Job
> control fatal
> error (-12)
> (DSGetJobInfo) ChequeaPedidosActivos.EL221: RT_STATUS Record for
> wave 653
> not found.
> (DSOpenJob) Cannot open job ChequeaPedidosActivos.EL221 - not a
> runnablejob"
>
> Let me clarify: the CHKSAP job runs the ChequeaPedidosActivos job,
> usingthe same invocation id. When it tries to start the job, the
> message apears,
> and the CHKSAP.EL221 job aborts.
>
> When I try to compile the job ChequeaPedidosActivos, another error
> messageappears saying that job is being monitored. When I try to
> erase it, the
> same message appears.
>
> Can anybody tell me what is happening, and how can I solve this
> situation ?
>
> Thanks in advance.
>
>
> Guillermo P. Barsky - gbarsky@osde.com.ar
> Gerencia de Sistemas - Desarrollo
>
> OSDE Binario - Filial Metropolitana
> Alem 1067, Piso 16
> (5411)4510-4330
> http://www.osde.com.ar
>
>
>
Thaks for your response, but there is not an active monitor.
Guillermo P. Barsky - gbarsky@osde.com.ar
Gerencia de Sistemas - Desarrollo
OSDE Binario - Filial Metropolitana
Alem 1067, Piso 16
(5411)4510-4330
http://www.osde.com.ar
"William Tan"
com.my> cc:
Asunto: Re: URGENT: problem with wave 653
10/11/2003 02:36
p.m.
Por favor, responda
a datastage-users
Check if you have the Monitor Window in the Director opened for this
job. If it is opened, close the monitor window and then compile the job.
----- Original Message -----
From: gbarsky@osde.com.ar
Date: Monday, November 10, 2003 9:50 pm
Subject: URGENT: problem with wave 653
>
>
>
>
> Hi Forumers:
>
> I have a big problem, and I'm not sure from where it is comming. I
> got the
> following error message:
>
> "CHKSAP.EL221.JobControl (fatal error from DSAttachJob): Job
> control fatal
> error (-12)
> (DSGetJobInfo) ChequeaPedidosActivos.EL221: RT_STATUS Record for
> wave 653
> not found.
> (DSOpenJob) Cannot open job ChequeaPedidosActivos.EL221 - not a
> runnablejob"
>
> Let me clarify: the CHKSAP job runs the ChequeaPedidosActivos job,
> usingthe same invocation id. When it tries to start the job, the
> message apears,
> and the CHKSAP.EL221 job aborts.
>
> When I try to compile the job ChequeaPedidosActivos, another error
> messageappears saying that job is being monitored. When I try to
> erase it, the
> same message appears.
>
> Can anybody tell me what is happening, and how can I solve this
> situation ?
>
> Thanks in advance.
>
>
> Guillermo P. Barsky - gbarsky@osde.com.ar
> Gerencia de Sistemas - Desarrollo
>
> OSDE Binario - Filial Metropolitana
> Alem 1067, Piso 16
> (5411)4510-4330
> http://www.osde.com.ar
>
>
>
<b>PLEASE READ</b>
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
URGENT: problem with wave 653
I got messages like this when I increased my Oracle input array size. I had used all of the memory on my Win2000 Application Server where DS 5.2 is running. I had over 15 jobs abend and experienced three different abends. I have reduced the array size and then reworked by job network to reduce the number of jobs executing at same time. The problem has gone away.
Daniel A. Sutton Associate Technical Fellow, Boeing Navigator
Hierarchical Databases, Data Warehouse, and Migration Control Group
To be in a dialogue, we must listen from where the other person speaks.
Otherwise, we only have two monologues
Boeing Philadelphia IS/Data Management
610-591-7124 610-591-7524(fax) 800-946-4646 pwd 1499533(beeper)
email: daniel.a.sutton@boeing.com
Regular Mail Address:
Boeing
PO Box 16858 MS-P29-29
Philadelphia PA 19142-0858
-----Original Message-----
From: gbarsky@osde.com.ar [mailto:gbarsky@osde.com.ar]
Sent: Monday, November 10, 2003 8:50 AM
To: datastage-users@oliver.com
Subject: URGENT: problem with wave 653
Hi Forumers:
I have a big problem, and I'm not sure from where it is comming. I got the
following error message:
"CHKSAP.EL221.JobControl (fatal error from DSAttachJob): Job control fatal
error (-12)
(DSGetJobInfo) ChequeaPedidosActivos.EL221: RT_STATUS Record for wave 653
not found.
(DSOpenJob) Cannot open job ChequeaPedidosActivos.EL221 - not a runnable
job"
Let me clarify: the CHKSAP job runs the ChequeaPedidosActivos job, using
the same invocation id. When it tries to start the job, the message apears,
and the CHKSAP.EL221 job aborts.
When I try to compile the job ChequeaPedidosActivos, another error message
appears saying that job is being monitored. When I try to erase it, the
same message appears.
Can anybody tell me what is happening, and how can I solve this situation ?
Thanks in advance.
Guillermo P. Barsky - gbarsky@osde.com.ar
Gerencia de Sistemas - Desarrollo
OSDE Binario - Filial Metropolitana
Alem 1067, Piso 16
(5411)4510-4330
http://www.osde.com.ar
Daniel A. Sutton Associate Technical Fellow, Boeing Navigator
Hierarchical Databases, Data Warehouse, and Migration Control Group
To be in a dialogue, we must listen from where the other person speaks.
Otherwise, we only have two monologues
Boeing Philadelphia IS/Data Management
610-591-7124 610-591-7524(fax) 800-946-4646 pwd 1499533(beeper)
email: daniel.a.sutton@boeing.com
Regular Mail Address:
Boeing
PO Box 16858 MS-P29-29
Philadelphia PA 19142-0858
-----Original Message-----
From: gbarsky@osde.com.ar [mailto:gbarsky@osde.com.ar]
Sent: Monday, November 10, 2003 8:50 AM
To: datastage-users@oliver.com
Subject: URGENT: problem with wave 653
Hi Forumers:
I have a big problem, and I'm not sure from where it is comming. I got the
following error message:
"CHKSAP.EL221.JobControl (fatal error from DSAttachJob): Job control fatal
error (-12)
(DSGetJobInfo) ChequeaPedidosActivos.EL221: RT_STATUS Record for wave 653
not found.
(DSOpenJob) Cannot open job ChequeaPedidosActivos.EL221 - not a runnable
job"
Let me clarify: the CHKSAP job runs the ChequeaPedidosActivos job, using
the same invocation id. When it tries to start the job, the message apears,
and the CHKSAP.EL221 job aborts.
When I try to compile the job ChequeaPedidosActivos, another error message
appears saying that job is being monitored. When I try to erase it, the
same message appears.
Can anybody tell me what is happening, and how can I solve this situation ?
Thanks in advance.
Guillermo P. Barsky - gbarsky@osde.com.ar
Gerencia de Sistemas - Desarrollo
OSDE Binario - Filial Metropolitana
Alem 1067, Piso 16
(5411)4510-4330
http://www.osde.com.ar
<b>PLEASE READ</b>
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
URGENT: problem with wave 653
Daniel:
Thank you for sharing your experience.
The problem is fixed. I don't know what I did: if any of the compilations
done, or any of the "uvsh.exe" tasks killed from within the server. But now
it's working fine.
Thanks again.
Guillermo P. Barsky - gbarsky@osde.com.ar
Gerencia de Sistemas - Desarrollo
OSDE Binario - Filial Metropolitana
Alem 1067, Piso 16
(5411)4510-4330
http://www.osde.com.ar
"Sutton, Daniel A"
eing.com> cc:
Asunto: RE: URGENT: problem with wave 653
12/11/2003 02:49
p.m.
Por favor, responda
a datastage-users
I got messages like this when I increased my Oracle input array size. I
had used all of the memory on my Win2000 Application Server where DS 5.2 is
running. I had over 15 jobs abend and experienced three different abends.
I have reduced the array size and then reworked by job network to reduce
the number of jobs executing at same time. The problem has gone away.
Daniel A. Sutton Associate Technical Fellow, Boeing Navigator
Hierarchical Databases, Data Warehouse, and Migration Control Group
To be in a dialogue, we must listen from where the other person speaks.
Otherwise, we only have two monologues
Boeing Philadelphia IS/Data Management
610-591-7124 610-591-7524(fax) 800-946-4646 pwd 1499533(beeper)
email: daniel.a.sutton@boeing.com
Regular Mail Address:
Boeing
PO Box 16858 MS-P29-29
Philadelphia PA 19142-0858
-----Original Message-----
From: gbarsky@osde.com.ar [mailto:gbarsky@osde.com.ar]
Sent: Monday, November 10, 2003 8:50 AM
To: datastage-users@oliver.com
Subject: URGENT: problem with wave 653
Hi Forumers:
I have a big problem, and I'm not sure from where it is comming. I got the
following error message:
"CHKSAP.EL221.JobControl (fatal error from DSAttachJob): Job control fatal
error (-12)
(DSGetJobInfo) ChequeaPedidosActivos.EL221: RT_STATUS Record for wave 653
not found.
(DSOpenJob) Cannot open job ChequeaPedidosActivos.EL221 - not a runnable
job"
Let me clarify: the CHKSAP job runs the ChequeaPedidosActivos job, using
the same invocation id. When it tries to start the job, the message apears,
and the CHKSAP.EL221 job aborts.
When I try to compile the job ChequeaPedidosActivos, another error message
appears saying that job is being monitored. When I try to erase it, the
same message appears.
Can anybody tell me what is happening, and how can I solve this situation ?
Thanks in advance.
Guillermo P. Barsky - gbarsky@osde.com.ar
Gerencia de Sistemas - Desarrollo
OSDE Binario - Filial Metropolitana
Alem 1067, Piso 16
(5411)4510-4330
http://www.osde.com.ar
Thank you for sharing your experience.
The problem is fixed. I don't know what I did: if any of the compilations
done, or any of the "uvsh.exe" tasks killed from within the server. But now
it's working fine.
Thanks again.
Guillermo P. Barsky - gbarsky@osde.com.ar
Gerencia de Sistemas - Desarrollo
OSDE Binario - Filial Metropolitana
Alem 1067, Piso 16
(5411)4510-4330
http://www.osde.com.ar
"Sutton, Daniel A"
eing.com> cc:
Asunto: RE: URGENT: problem with wave 653
12/11/2003 02:49
p.m.
Por favor, responda
a datastage-users
I got messages like this when I increased my Oracle input array size. I
had used all of the memory on my Win2000 Application Server where DS 5.2 is
running. I had over 15 jobs abend and experienced three different abends.
I have reduced the array size and then reworked by job network to reduce
the number of jobs executing at same time. The problem has gone away.
Daniel A. Sutton Associate Technical Fellow, Boeing Navigator
Hierarchical Databases, Data Warehouse, and Migration Control Group
To be in a dialogue, we must listen from where the other person speaks.
Otherwise, we only have two monologues
Boeing Philadelphia IS/Data Management
610-591-7124 610-591-7524(fax) 800-946-4646 pwd 1499533(beeper)
email: daniel.a.sutton@boeing.com
Regular Mail Address:
Boeing
PO Box 16858 MS-P29-29
Philadelphia PA 19142-0858
-----Original Message-----
From: gbarsky@osde.com.ar [mailto:gbarsky@osde.com.ar]
Sent: Monday, November 10, 2003 8:50 AM
To: datastage-users@oliver.com
Subject: URGENT: problem with wave 653
Hi Forumers:
I have a big problem, and I'm not sure from where it is comming. I got the
following error message:
"CHKSAP.EL221.JobControl (fatal error from DSAttachJob): Job control fatal
error (-12)
(DSGetJobInfo) ChequeaPedidosActivos.EL221: RT_STATUS Record for wave 653
not found.
(DSOpenJob) Cannot open job ChequeaPedidosActivos.EL221 - not a runnable
job"
Let me clarify: the CHKSAP job runs the ChequeaPedidosActivos job, using
the same invocation id. When it tries to start the job, the message apears,
and the CHKSAP.EL221 job aborts.
When I try to compile the job ChequeaPedidosActivos, another error message
appears saying that job is being monitored. When I try to erase it, the
same message appears.
Can anybody tell me what is happening, and how can I solve this situation ?
Thanks in advance.
Guillermo P. Barsky - gbarsky@osde.com.ar
Gerencia de Sistemas - Desarrollo
OSDE Binario - Filial Metropolitana
Alem 1067, Piso 16
(5411)4510-4330
http://www.osde.com.ar
<b>PLEASE READ</b>
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.
Do not contact admin unless you have technical support or account questions. Do not send email or Private Messages about discussion topics to ADMIN. Contact the webmaster concerning abusive or offensive posts.